Description
The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers.
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact.
There are 3 modes of operation: rotation and hammering, hammering only and rotation only.
Specifications:
No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm.
Impact Energy: 2.0 joules.
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm.
Weight: 3.3kg.
All vibration figures quoted are Tri-axial to EN 60745 2006.
Vibration: Drilling: 3.5 m/sec²
Vibration K Factor: 1.5 m/sec²
Vibration: Hammer Drilling: 13.5 m/sec²
Vibration: Chiselling: 10.5 m/sec²
The Makita DHR243Z SDS Plus 3-Mode Hammer Drill is supplied as a Bare Unit - No Battery or Charger.
Specifications
Catalog Page Number
379
Brand
Makita
Categories
Power Tools
Category
Drills
Form
Cordless SDS Drills
Input Power (Battery)
3 Mode - Rotation Stop
Manufacturer
Makita
Max. Concrete/Core Drill
24mm
No Load Speed rpm
2.0
Operation Modes
3 Mode
Type
Drills
Voltage
18V
Weight
3.3kg
selection not available, try a different combination
selection not available, try a different combination
Compare
